Guangzhou Academy of Fine Arts/Donghua University
Tang Teng, Zeng Xiangming, Jiang Yufei, Xie Chenmu

CERTAIN electric drill has changed the complicated and complicated shape of traditional electric drill and replaced it with simple and smooth curves. An immersive LED breathing light is installed in the front section of the equipment. This component can not only help users to see the position of the drill bit in a relatively dark environment, but also give the electric drill more differentiated features and design sense. In addition, this part of the breathing light has three brightness display modes. In the lighting mode, it will display a relatively gentle and uniform brightness. When the lighting is low, the breathing light will display periodic flashes. In addition, in the rapid mode, the breathing light will follow The rotation of the drill bit lights up and goes out after stopping. The CERTAIN body is made of high-purity polyD lactic acid material, which has better thermal stability and higher strength than the traditional PLA polylactic acid material. It can be processed in a variety of ways, such as extrusion, spinning, and biaxial Stretching, injection blow molding. The material can withstand heat of more than 110 degrees, and the impact strength can reach ABS plastic grade. This kind of material can basically realize soil surface degradation while having engineering plastic strength. It is worth noting that the CMF surface material of the CERTAIN electric drill has also been additionally considered and configured. The surface of the electric drill is made of metallic paint and sandblasting, which has better product durability and weather resistance than the traditional electric drill. While prolonging the appearance life of the product, it can minimize the damage caused by scratches and bumps to the product surface. Through a series of appearance construction, the Xiteng electric drill can open a large gap with the same type of products in the market, forming a differentiation, and bringing more profits and benefits to the enterprise. Finally, a real-time feedback interface for equipment data is installed at the end of the product, which is mainly used to feed back visual equipment operation data, so that users can more intuitively understand the real-time data of the equipment, so as to reduce accidents caused by improper operation or equipment failure.