Project time: 2023/11 - 2024/01

Cupping, scraping two in one; 9-gear negative pressure adjustment, intimate care of each user's use feeling; Strong air pump, stable suction; Constant temperature red double-effect hot compress; Multi-gear EMS adjustment; Support one-button pressure relief and refuse to pull the skin of the can.

Product Design: Bai Jiajun
Function definition: Bai Jiajun
CMF Design: Bai Jiajun
visual effect design: bai jiajun
Visual execution: Bai Jiajun
Graphic Design: Bai Jiajun

Project: Tianjin Kangyuan Technology Co., Ltd.
Customer service: tiens

DDS negative pressure scraping instrument is entrusted by Party A to start product research and development. The proposal time is very short. The first draft of the design is to independently complete the output of two creative schemes and complete the preliminary model and design effect diagram within three days. Now this is the design direction of the proposal. In the following time, the existing problems in the product design will be continuously refined and improved, and the design details of the model will be modified and adjusted, comprehensive consideration of the problems and criticisms of the product in the process of user use. At present, the product is still in the process of optimization and adjustment before the overall landing.
DDS negative pressure scraping instrument is one of the few design cases that have been seen in the past two years. ha, ha, ha:) after taking part in the work in March 22, he joined kangyuan science and technology and began to invest in product research and development. it is the third year so far. although the design is still immature and immature, he still dared to send it out for everyone to discuss, accept criticism and advice, and will continue to learn and accumulate design experience. the shortcomings will be corrected modestly :)
* Commercial project, has applied for patent protection, only for study and discussion

The DDS negative pressure scraping instrument was commissioned by Party A to start product research and development. The proposal time was required to be very short, and the initial design draft was independently completed within three days to output two creative solutions and complete the preliminary model and designThe design rendering shows that this is the final design direction that has been proposed. In the future, we will continuously review and improve the problem points in product design, modify and adjust the design details of the model, Taking into account the issues and criticisms of the product during user use. At present, the product is still undergoing optimization and adjustment before its overall implementation.
The DDS negative pressure scraping instrument is one of the few design cases that has been seen in the industry for two years, hahaha : )After interning and starting work in March 2022, I joined Kangyuan Technology and began to invest in product research and development. It is now my third year, and although the design is still immature and immature, I dare to share it for everyone to discuss, Accepting criticism and guidance, constantly learning and accumulating design experience, and humbly correcting shortcomings : )
*Commercial project, patent protection applied for, for learning and discussion only

The overall design concept maintains a minimalist design style. Considering the problems that may exist in the actual use of the product, the middle section of the product is adjusted to a non-slip pattern design in the product design process to ensure that the product is in the middle of the can and the palm of the hand. The friction coefficient is not easy to get out of hand

Disinfection lamp is embedded in the base of the product, so that the whole product can be more at ease when used at home. Considering that the residues of essential oil and nursing liquid during skin care may accumulate in the base to form dirt that is not easy to take care of, the inner surface of the base is treated with high light, and the embedded liquid accumulation tank is designed in the middle part, so as to avoid the possibility of the above situation and ensure the cleanliness and normal use of the product.

The product control panel is set at the top of the product, and the elevation angle design is 23.5 degrees, so that the product can also intuitively see the functions and power status of the product at this stage during use.

The rear end of the product is provided with external accessories and charging ports.