High density LED display

肯德基爷爷到处喷 2019-01-08

Reply

Is it necessary to have radian locks on both sides?

ZEONOwner 2019-01-08

Reply

The functional aspects are defined by the customer himself

Write a comment

Hang♂% 2017-12-13

Reply

Like

就这？ 2017-08-25

Reply

This is your own angle lock, which is not bad. The upper, lower, left and right locks are ready-made hardware. It is a bit unreasonable to put your hands next to the power box. It is difficult to align the power force during installation (it is not easy to align the power force with the center of gravity in both hands). There are two popular modes in the industry. 1. Modular separation (the power box module can be maintained back and forth). 2, functionality cannot be reflected. After all, the appearance serves the function first, then the aerial insertion position. The interference of the upper lock is a bit too much. Can it be inserted? I'm not sure here. The last is the handle. I hope the design style of the handle is similar to that of the handle, so as to be more integrated. If you want to deal with a customer like me, the product still lacks a small display screen to display the operating parameters. More consideration should be given to the feasibility of the function. The rendering is good. It is worth praising. With a sentence, what kind of painting has been used for how long

IDSTONE 2017-08-25

Reply

This module can't be maintained after, this angle lock should be provided by the customer, and there are similar ready-made samples on the market. The upper aerial insertion wire should interfere with the top lock position. If the truss interface is above the led screen, I don't understand what is the three holes below?

就这？ 2017-08-25

Reply

In the last picture, the schematic diagram of the screen body connection, the side lock is used, but the angle lock is still in use. I guess the author's intention is to lock the angle lock on the box body.

Mr.陳 2017-08-29

Reply

The two great gods did not understand the background of other people's projects and the needs of customers, and then they made a lot of balala to show how professional you are.

IDSTONE 2017-09-11

Reply

The plan is good! Exchange and study! There is nothing shown!

Write a comment

小小未来 2017-08-24

Reply

The display screen has no screen, isn't it too professional.

ZEONOwner 2017-08-24

Reply

This is the led splicing screen. The front effect is lit as a screen. This is the back of the display screen and the place where I designed it.

Write a comment

SSuperma 2017-08-24

Reply

See only the force behind it? The screen doesn't see it.

ZEONOwner 2017-08-24

Reply

What I designed is the back part, with the LED packaged module in front. This is the display screen of the stage, and the front is a square display screen.

Write a comment