90 anti dust drill

There is a transparent protective cover around its drill bit, which can not only stabilize the fuselage and vertical working plane, but also prevent droplets from splashing when looking up. The 90-degree electric drill is innovatively designed on the traditional electric drill handle. After 45-degree rotating shaft is added, the electric drill can move vertically on the internal movement structure of the electric drill and become a small bench drill. Electric drills are convenient for people's lives, but improper use is also dangerous. The current design causes many injuries, and the user must fix the screws in place to expose the hands and sleeves to the fast-turning position. We set the system not only to simplify the electric drill process, but also to prevent accidents. In order to solve the problems of the current electric drilling rig, such as loud noise, not intelligent enough, not portable enough, inconvenient storage, and messy winding of wires, our team and additional designers have made a brand-new design for the electric drilling rig. The traditional electric drill dust debris is easy to fly and noisy, and is not conducive to the health of the user's lungs. There is a transparent protective cover around its drill bit, which can not only stabilize the fuselage and vertical working plane, but also prevent droplets from splashing when looking up. There is a pressure speed control switch and an auxiliary depth measuring device at the bottom of the fuselage. Press the switch at the bottom of the fuselage by hand. The harder you press, the faster the speed. This special operation method can effectively avoid the sudden start of the motor. In the case of loss of control, the auxiliary depth measuring device can facilitate the user to control the depth of the hole more accurately.